Grand House 78

Prefabricated single-story
house with a usable area of 78 m²

Grand House 78

Prefabricated Single-Storey House with Terrace

Grand House 78 is a single-storey house with a terrace, designed in a modern barn style and tailored for a family of three. The layout includes a spacious 37 m² living room with kitchen annex, two well-proportioned bedrooms, a large bathroom, a utility room, and a vestibule.

Storage areas—often overlooked in architectural plans—have been given priority. The house features a spacious vestibule with a built-in wardrobe recess, a utility room for storage and technical equipment, a walk-in closet in the master bedroom, and various recesses and alcoves designed for additional wardrobes.

The building meets the technical requirements specified in the WT2021 regulation. It is a year-round, energy-efficient home, with insulation parameters very close to passive house standards. The house fulfills all criteria for construction with a full building permit.

With the use of modern ventilation, heating, cooling, and renewable energy systems, the building can be constructed to net-zero energy standard, where the annual energy balance is zero.

Purpose

Our prefabricated single-storey house with a terrace is an excellent option for a permanent residence for a family of three. The house is divided into a bedroom zone on one side and a living zone on the other. The functional layout ensures comfortable living conditions while offering stunning views through large terrace windows.

Specifications

Functional Living Space

The house offers everything needed for year-round living: a spacious kitchen and living area, two bedrooms, a walk-in closet, one bathroom, a vestibule, and a utility room.

The utility room provides space for a washing machine and allows for the installation of larger technical systems, such as a water softener, pressure booster set, water heater, or heat pump.

The open-plan kitchen and living room on the ground floor is the heart of the home—a space for family life and gatherings with loved ones. The smart layout ensures there’s enough room for everyone. With a fireplace integrated into the living area, we believe the warmth of home takes on even greater meaning.

The non-usable attic offers generous storage space not included in the official floor area, ideal for large or seasonal items.

Top-Quality Materials

The facade of our house is finished with spruce cladding. The roof is covered with modular metal roofing tiles. The window joinery includes six-chamber, triple-glazed windows, installed using the warm installation method.

The main insulation of the house consists of mineral wool or, optionally, Steico Zell blown-in wood fibre. The house is additionally insulated with Steico thermal insulation boards.

Floor Plans & Interior Visualizations

See the layout of our modern barn-style home.
For more detailed architectural materials, we encourage you to get in touch directly.

Interior Finish Options

Our prefabricated timber frame house design is available in three finishing options:

Closed Shell Stage

280 000 PLN
(net + 8% VAT)

Developer Stage

390 000 PLN
(net + 8% VAT)

Includes Closed Shell Stage, plus:

Turnkey Finish

Price upon request
(net + 8% VAT)

Includes Developer Stage, plus:

Download Full Offer

Stay in touch and download the complete catalog containing all of our house designs along with detailed pricing.

Grand House 78 - Sypialnia duża

Premium Standard Wall System

Discover our heavy timber prefabricated wall system

Exterior Wall with Timber Cladding [40 cm]

  1. Scandinavian spruce cladding, tongue and groove
  2. Battens and counter-battens
  3. Tyvek Housewrap windproof membrane
  4. Steico / Naturheld wood fibre insulation board
  5. C24 KVH finger-jointed structural timber
  6. Mineral wool insulation
  7. MFP P5 structural stiffening board
  8. Steico Multi Membra 5 vapour barrier membrane
  9. Service cavity
  10. Mineral wool insulation
  11. Fire-resistant, moisture-resistant Fermacell board
U = 0,135 W/m²K

[mm]

22

38 x 58 x 2

60

60 x 160 

160

12

60 x 60 

50

12,5

Modularen - Przegroda ściany prefabrykowanej

Robust structure built using German heavy timber frame technology

We build our walls using certified KVH structural timber, finger-jointed and glued, with a cross-section of 60 x 160 mm. This timber contains 47% more raw material than standard Scandinavian beams with a 45 x 145 mm cross-section. The more massive wall structure significantly improves the building’s statics and the mechanical performance of structural joints.

Additionally, instead of standard gypsum plasterboard, we use Fermacell gypsum fibre boards as the interior wall finish. Fermacell boards are twice as dense and therefore significantly harder than standard plasterboard, which greatly improves the building’s structural performance and fire resistance. These boards are also moisture-resistant, making them suitable for wet areas.

Our German heavy frame construction system, combined with double wall stiffening using Fermacell and MFP P5 boards, ensures that our buildings meet the requirements of Poland’s highest wind and snow load zones as standard.

Vapour-open construction in accordance with building physics

The walls and roofs of our houses are additionally insulated with 6.0 cm thick Steico insulation boards. This results in a total wall insulation thickness of 27.0 cm [Uw = 0.135 W/m²K] and roof insulation of 30.0 cm [Uw = 0.126 W/m²K]. These boards significantly improve the thermal transmittance coefficient (Uw) of the building envelope and, due to their high specific heat capacity (Cw), also protect against overheating in summer. Additionally, they enhance acoustic insulation.

As a result, our homes qualify as premium in terms of both energy efficiency and soundproofing. Wood fibre boards are vapour-open materials that can be installed on the exterior side of the structure. Unlike polystyrene or OSB boards, which block moisture escape when placed on the exterior, wood fibre boards allow for proper moisture diffusion, significantly extending the life of the structure and preventing mould and mildew growth.

Installation Cavity for Electrical and Plumbing Systems

The installation battening we use on the interior side of the walls serves as a dedicated space for mounting electrical boxes, running cables in conduits, and concealing water pipes. This additional installation cavity is designed to protect the vapour barrier from being punctured.

Failing to use an installation cavity—and instead embedding installations directly into the main wall structure—leads to puncturing the vapour barrier. This allows water vapour to penetrate the structure and the main insulation layer, ultimately degrading the wall system and contributing to mould and mildew growth within the building.

The installation cavity eliminates this issue by preserving the continuity and airtightness of the vapour barrier, as all utilities are placed within the secondary battening layer. This cavity also provides an additional 5 cm layer of insulation.

Thanks to this wall system design and the high quality of materials we use, we confidently offer a 30-year warranty on the structural integrity of our homes.

Premium Standard Wall System

Discover our heavy timber prefabricated wall system
Modularen - Przegroda ściany prefabrykowanej
U = 0,135 W/m²K
  1. Scandinavian spruce cladding, tongue and groove
  2. Battens and counter-battens
  3. Tyvek Housewrap windproof membrane
  4. Steico / Naturheld wood fibre insulation board
  5. C24 KVH finger-jointed structural timber
  6. Mineral wool insulation
  7. MFP P5 structural stiffening board
  8. Steico Multi Membra 5 vapour barrier membrane
  9. Service cavity
  10. Mineral wool insulation
  11. Fire-resistant, moisture-resistant Fermacell board

22

38 x 58 x 2

60

60 x 160 

160

12

60 x 60 

50

12,5

Exterior Wall with Timber Cladding [40 cm]

[mm]

Robust structure built using German heavy timber frame technology

We build our walls using certified KVH structural timber, finger-jointed and glued, with a cross-section of 60 x 160 mm. This timber contains 47% more raw material than standard Scandinavian beams with a 45 x 145 mm cross-section. The more massive wall structure significantly improves the building’s statics and the mechanical performance of structural joints.

Additionally, instead of standard gypsum plasterboard, we use Fermacell gypsum fibre boards as the interior wall finish. Fermacell boards are twice as dense and therefore significantly harder than standard plasterboard, which greatly improves the building’s structural performance and fire resistance. These boards are also moisture-resistant, making them suitable for wet areas.

Our German heavy frame construction system, combined with double wall stiffening using Fermacell and MFP P5 boards, ensures that our buildings meet the requirements of Poland’s highest wind and snow load zones as standard.

Vapour-open construction in accordance with building physics

The walls and roofs of our houses are additionally insulated with 6.0 cm thick Steico insulation boards. This results in a total wall insulation thickness of 27.0 cm [Uw = 0.135 W/m²K] and roof insulation of 30.0 cm [Uw = 0.126 W/m²K]. These boards significantly improve the thermal transmittance coefficient (Uw) of the building envelope and, due to their high specific heat capacity (Cw), also protect against overheating in summer. Additionally, they enhance acoustic insulation.

As a result, our homes qualify as premium in terms of both energy efficiency and soundproofing. Wood fibre boards are vapour-open materials that can be installed on the exterior side of the structure. Unlike polystyrene or OSB boards, which block moisture escape when placed on the exterior, wood fibre boards allow for proper moisture diffusion, significantly extending the life of the structure and preventing mould and mildew growth.

Installation Cavity for Electrical and Plumbing Systems

The installation battening we use on the interior side of the walls serves as a dedicated space for mounting electrical boxes, running cables in conduits, and concealing water pipes. This additional installation cavity is designed to protect the vapour barrier from being punctured.

Failing to use an installation cavity—and instead embedding installations directly into the main wall structure—leads to puncturing the vapour barrier. This allows water vapour to penetrate the structure and the main insulation layer, ultimately degrading the wall system and contributing to mould and mildew growth within the building.

The installation cavity eliminates this issue by preserving the continuity and airtightness of the vapour barrier, as all utilities are placed within the secondary battening layer. This cavity also provides an additional 5 cm layer of insulation.

Thanks to this wall system design and the high quality of materials we use, we confidently offer a 30-year warranty on the structural integrity of our homes.

Completed Prefabricated Timber Frame Homes

Our Selected Energy-Efficient House Projects

Check out our other projects

Explore our range of year-round prefabricated timber frame houses.
Shopping Basket