Grand House 90 is a single-storey house in the modern barn style, designed for a family of three. The interior includes a spacious 37 m² living room with kitchen annex, two well-proportioned bedrooms, a bathroom, a separate WC, a utility room, and a vestibule.
Storage areas — often overlooked in architectural designs — were given high priority. The house features a spacious vestibule with a built-in wardrobe recess, a utility room for storage and technical equipment, a walk-in closet in the master bedroom, and numerous recesses and alcoves intended for additional wardrobes.
The building complies with the technical standards set by WT2021. It is a year-round, energy-efficient home with insulation parameters very close to passive house standards. The house meets all requirements for construction with a full building permit.
With modern solutions in ventilation, heating, cooling, and renewable energy systems, the house can be built to net-zero energy standard, where the annual energy balance equals zero.
Our prefabricated single-storey house under 100 m² is an excellent choice as a permanent home for a family of three. The layout separates the bedroom zone on one side of the house from the living zone on the other. The functional room arrangement ensures comfortable living while also allowing residents to enjoy beautiful views through large terrace windows.
The house offers everything needed for permanent living: a spacious kitchen with living room, two bedrooms, a bathroom, separate WC, vestibule, and a utility room.
The utility room accommodates a washing machine and is ready for the installation of larger sanitary equipment, such as a water softener, pressure system, water heater, or heat pump.
The open-plan living room with kitchen is the heart of the home — a space for everyday life and gatherings with family and friends. The well-designed layout provides enough room for everyone to enjoy time together. With a fireplace integrated into the living area, we believe the concept of the “hearth of the home” takes on even deeper meaning.
The non-usable attic offers additional storage space not included in the official floor area — ideal for bulky or seasonal items.
The facade of our house is finished with spruce cladding. The roof is covered with modular metal roofing tiles. The window joinery includes six-chamber, triple-glazed windows, installed using the warm installation method.
The main insulation of the house consists of mineral wool or, optionally, Steico Zell blown-in wood fibre. The house is additionally insulated with Steico thermal insulation boards.
Our prefabricated timber frame house design is available in three finishing options:
Stay in touch and download the complete catalog containing all of our house designs along with detailed pricing.
22
38 x 58 x 2
–
60
60 x 160
160
12
–
60 x 60
50
12,5
We build our walls using certified KVH structural timber, finger-jointed and glued, with a cross-section of 60 x 160 mm. This timber contains 47% more raw material than standard Scandinavian beams with a 45 x 145 mm cross-section. The more massive wall structure significantly improves the building’s statics and the mechanical performance of structural joints.
Additionally, instead of standard gypsum plasterboard, we use Fermacell gypsum fibre boards as the interior wall finish. Fermacell boards are twice as dense and therefore significantly harder than standard plasterboard, which greatly improves the building’s structural performance and fire resistance. These boards are also moisture-resistant, making them suitable for wet areas.
Our German heavy frame construction system, combined with double wall stiffening using Fermacell and MFP P5 boards, ensures that our buildings meet the requirements of Poland’s highest wind and snow load zones as standard.
The walls and roofs of our houses are additionally insulated with 6.0 cm thick Steico insulation boards. This results in a total wall insulation thickness of 27.0 cm [Uw = 0.135 W/m²K] and roof insulation of 30.0 cm [Uw = 0.126 W/m²K]. These boards significantly improve the thermal transmittance coefficient (Uw) of the building envelope and, due to their high specific heat capacity (Cw), also protect against overheating in summer. Additionally, they enhance acoustic insulation.
As a result, our homes qualify as premium in terms of both energy efficiency and soundproofing. Wood fibre boards are vapour-open materials that can be installed on the exterior side of the structure. Unlike polystyrene or OSB boards, which block moisture escape when placed on the exterior, wood fibre boards allow for proper moisture diffusion, significantly extending the life of the structure and preventing mould and mildew growth.
The installation battening we use on the interior side of the walls serves as a dedicated space for mounting electrical boxes, running cables in conduits, and concealing water pipes. This additional installation cavity is designed to protect the vapour barrier from being punctured.
Failing to use an installation cavity—and instead embedding installations directly into the main wall structure—leads to puncturing the vapour barrier. This allows water vapour to penetrate the structure and the main insulation layer, ultimately degrading the wall system and contributing to mould and mildew growth within the building.
The installation cavity eliminates this issue by preserving the continuity and airtightness of the vapour barrier, as all utilities are placed within the secondary battening layer. This cavity also provides an additional 5 cm layer of insulation.
Thanks to this wall system design and the high quality of materials we use, we confidently offer a 30-year warranty on the structural integrity of our homes.
22
38 x 58 x 2
–
60
60 x 160
160
12
–
60 x 60
50
12,5
Exterior Wall with Timber Cladding[40 cm]
We build our walls using certified KVH structural timber, finger-jointed and glued, with a cross-section of 60 x 160 mm. This timber contains 47% more raw material than standard Scandinavian beams with a 45 x 145 mm cross-section. The more massive wall structure significantly improves the building’s statics and the mechanical performance of structural joints.
Additionally, instead of standard gypsum plasterboard, we use Fermacell gypsum fibre boards as the interior wall finish. Fermacell boards are twice as dense and therefore significantly harder than standard plasterboard, which greatly improves the building’s structural performance and fire resistance. These boards are also moisture-resistant, making them suitable for wet areas.
Our German heavy frame construction system, combined with double wall stiffening using Fermacell and MFP P5 boards, ensures that our buildings meet the requirements of Poland’s highest wind and snow load zones as standard.
The walls and roofs of our houses are additionally insulated with 6.0 cm thick Steico insulation boards. This results in a total wall insulation thickness of 27.0 cm [Uw = 0.135 W/m²K] and roof insulation of 30.0 cm [Uw = 0.126 W/m²K]. These boards significantly improve the thermal transmittance coefficient (Uw) of the building envelope and, due to their high specific heat capacity (Cw), also protect against overheating in summer. Additionally, they enhance acoustic insulation.
As a result, our homes qualify as premium in terms of both energy efficiency and soundproofing. Wood fibre boards are vapour-open materials that can be installed on the exterior side of the structure. Unlike polystyrene or OSB boards, which block moisture escape when placed on the exterior, wood fibre boards allow for proper moisture diffusion, significantly extending the life of the structure and preventing mould and mildew growth.
The installation battening we use on the interior side of the walls serves as a dedicated space for mounting electrical boxes, running cables in conduits, and concealing water pipes. This additional installation cavity is designed to protect the vapour barrier from being punctured.
Failing to use an installation cavity—and instead embedding installations directly into the main wall structure—leads to puncturing the vapour barrier. This allows water vapour to penetrate the structure and the main insulation layer, ultimately degrading the wall system and contributing to mould and mildew growth within the building.
The installation cavity eliminates this issue by preserving the continuity and airtightness of the vapour barrier, as all utilities are placed within the secondary battening layer. This cavity also provides an additional 5 cm layer of insulation.
Thanks to this wall system design and the high quality of materials we use, we confidently offer a 30-year warranty on the structural integrity of our homes.